AT&T StarLAN 10 Manual de Instruções descarregar pdf (Página 68)

100

101

Attendant Direct Extension Selection

Callback Queuing: Callbacks to the attendant do not flash at the associated Selector

Console.

Coverage: If the attendant receives a coverage call for a FPDC, the associated status LED

on the Selector Console will flash and then go dark when the call is answered by the

attendant.

Direct Group Calling: When all stations in a DGC group are busy, the DXS status LED on

the Selector Console lights.

Pooled Facilities: If a 1- or 2-digit FAC is used, the associated status LED on the Selector

Console will light steadily whenever all trunks in this group are busy. This does not occur

with 3- or 4-digit FACs.

Administration Requirements

Special Feature Ports:

● Assign a port on a ZTN79 ATL Station Circuit Pack for each Selector Console.

● Assign Group Select button hundreds groups.

System:

● Assign Selector Console Park codes.

● Park return time (0-240 seconds; default = 120).

Hardware Requirements

Requires an Attendant Selector Console, and a port interface on a ZTN79 ATL Station CP.

The Selector Console requires a KS-22911, List 1 Power Supply, associated 115V ac power

outlet, and a 400B-type Adapter. The 400B2 Adapter provides power to the console at the

wall jack. The Console connects to a port on the ZTN79 ATL Station CP.

Detailed connection information is provided in Figure 2-7. Descriptions of the Station

Interconnect Panel (SIP), Trunk Access Equipment (TAE), and associated cables and

adapters, as shown on the figures, are provided under “Connectivity” in Section 4.

2-37

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 612 613

Comentários a estes Manuais

Sem comentários

AT&T StarLAN 10 Manual de Instruções Página 68

Comentários a estes Manuais

Manuais e produtos relacionados com Redes AT&T StarLAN 10