AT&T AUDIX Voice Power Release 2.1.1 Manual do Utilizador Página 1

585-310-010Issue 1December 1991AUDIX™ Voice PowerRelease 2.1.1Switch Notes for System 75Communications System

About This ManualRelated DocumentsYou need to be familiar with the following documents: AT&T AUDIX ™ Voice Power Planning Guide and Forms(Docume

Overview and TestingOverviewBefore you can implement the initial AUDIX Voice Power system, the necessaryhardware and software components must already

Overview and TestingNon-Integrated SystemsIn the non-integrated mode, the interface between the telephone switch andAUDIX Voice Power does not include

Overview and Testing For integrated systems, a special circuit board containing interfacehardware for the telephone system is necessary. This circuit

Overview and TestingTesting Extensions and ConnectionsThe Switch Administrator now needs to assign analog lines and extensions foreach AUDIX Voice Pow

Overiew and TestingAssigning Information Service for TestingFor testing purposes, assign the Information Service to all channels.Reaching the Configur

Overview and Testing3.At the Voice System Administration menu, move the cursor toConfiguration Management and press (Enter).— The Configuration Manage

Overview and TestingEntering the Channel Assignments for TestingTo enter the channel assignments, follow these steps:1.At the Configuration Management

Overview and Testing4.Move the cursor to the Service: field.5.Press [F2] (CHOICES).— The Service Choices window appears.Application Package Administra

Overview and Testing7.Move the cursor to the Channels: field. Type all and press[F3] (SAVE).— The information is entered, the Assign Service to Voice

© 1991 AT&TAll Rights ReservedPrinted in USANOTICEWhile reasonable effort was made to ensure that the information in this document was complete at

Overview and TestingPlacing All Channels In Service for TestingIn the Voice Equipment window, all channels should show the INSERV state. Ifthe status

Overview and Testing3.In the New State: field, enter inserv or i and press (Enter).4.In the Equipment:field, enter card or ca and press (Enter).5.In t

Overview and Testing7.Press [F6] (CANCEL) to continue.— The Voice Equipment window reappears.8.Verify that all channels now show the lNSERV state.— lf

Overview and TestingVerifying ExtensionsTo verify the extensions assigned to AUDIX Voice Power channels, follow thesesteps:1.At the Voice System Admin

Overview and TestingMapping the Phone Extensions to Channels (Integrated Only)For the System 75 or DEFINITY G1 (integrated systems only), the phoneext

Overview and Testing2.At the Configuration Management menu, move the cursor toVoice Equipment and press (Enter).— The Voice Equipment window appears.3

Overview and Testing5.At the Assign form, move the cursor to Channel to PBX Extensionand press (Enter).— The Channel to PBX Extension form appears.6.E

Overview and Testing8.Press [F3] (SAVE).— The information is entered and an Information window appears.— Press (Enter) to close the lnformation window

AUDIX Voice PowerInitial Implementation2Assigning Services to ChannelsIntegrated SystemsIntegrated systems indicate to AUDIX Voice Power whether a cal

AUDIX Voice Power Initial ImplementationNon-Integrated SystemsTable 2-2 shows what service a call receives depending on what service isassigned for no

ContentsAbout This GuideiPurpose and ScopeiIntended AudienceiiAssistanceiiHow to Use This GuideiiiConventions Used in this GuideiiiInformation Convent

AUDIX Voice Power Initial ImplementationEntering Service AssignmentsUsing the information in Table 2-1 or Table 2-2, make any necessary adjustmentsto

AUDIX Voice Power Initial Implementation3.At the Voice System Administration menu, move the cursor toConfiguration Management and press (Enter).— The

AUDIX Voice Power Initial Implementation6.Press [F3] (ASSIGN).— The Assign Service to Voice Channels form appears.7.At the Service: field, press [F2]

AUDIX Voice Power Initial Implementation10.Press [F3] (SAVE).—The information is entered, the Assign Service to Voice Channelsform closes, and a Comma

AUDIX Voice Power Initial ImplementationSwitch Interface Administration ParametersSome specific parameters are necessary to tell AUDIX Voice Power how

AUDIX Voice Power Initial ImplementationYou should not need to change any of the switch interface parameters. However,if you need to change any of the

AUDIX Voice Power Initial Implementation3.At the Voice System Administration menu, move the cursor toSwitch Interfaces and press (Enter).— The Switch

AUDIX Voice Power Initial Implementation7.Move the cursor to the type of signaling specified on FORM B andpress (Enter).8.Press [F3] (SAVE).—The Switc

AUDIX Voice Power Initial ImplementationVerifying System ParametersAfter the first two groups of system parameters (Voice Mail and AutomatedAttendant

AUDIX Voice Power Initial ImplementationDisplaying Feature Access CodesThe codes used by System 75 or DEFINITY G1 to activate/deactivate theMessage Wa

ContentsVerifying System Parameters2-11Verifying Message Waiting Lamp Parameters2-11Displaying Feature Access Codes2-12Entering System Parameters2-133

AUDIX Voice Power Initial ImplementationFORM CSystem Parameter AdministrationVoice Mail ParametersSystem Operator. Extension:Pause for Touch-Tone Inpu

System 75 and DEFINITY G1Initial ImplementationThe information in this section is intended to help you and the System 75 orDEFINITY G1 Switch Administ

System 75 and DEFINITY G1 Initial ImplementationRelease R1V1 and R1V2 Software LimitationsThe R1V1 and R1V2 versions of System 75 have several limitat

System 75 and DEFINITY G1 Initial ImplementationAccessing the DCP Extension (R1V2)AUDIX Voice Power software that interfaces to System 75 R1V2 softwar

System 75 and DEFINITY G1 Initial ImplementationAUDIX Voice Power ChecklistWhen administering the switch, you will perform the following tasks: Confi

System 75 and DEFINITY G1 Initial ImplementationAssigning Class of Restrictions(Integrated Only)Figures 3-1, 3-2, and 3-3 depict the Class of Restrict

System 75 and DEFINITY G1 Initial Implementation COR 8- Voice Mail and Call Answer channelsCLASS OF RESTRICTIONCOR Number: 8FRL: 7APLT yCalling Party

System 75 and DEFINITY G1 Initial Implementation COR 16- DCP (PC/PBX) connection extensionCLASS OF RESTRICTIONCOR Number:16FRL: 7APLT yCalling Pa

System 75 and DEFINlTY G1 Initial ImplementationThe DCP extension should be restricted so that it cannot call itself or subscriberextensions. On the S

System 75 and DEFINITY G1 Initial ImplementationSTATIONExtension: 25001Type: 2500Lock Messages? nCOR: 8Room:Port: A0402 Security Code:COS: 1 Jack:Name

Figures2AUDIX Voice Power Initial Implementation2-1.System 75/DEFINITY G1 Feature AccessCode Form (Page 2)2-123System 75 and DEFINITY G1 InitialImplem

System 75 and DEFINITY G1 Initial Implementation6.Enter LWC Reception:according to the following table:7.Release SettingR1V1yR1V2 yesR1V3ap-speG1msa-s

System 75 and DEFINITY G1 Initial ImplementationFigure 3-5.System 75/DEFINITY G1 Display Station Command Formfor DCP Link3-11

System 75 and DEFINITY G1 Initial ImplementationAdministering Hunt GroupsHunt groups should be created when more than one extension number isassigned

iSystem 75 and DEFINlTY G1 Initial ImplementationCreating Hunt GroupsTo create a hunt group, use the add hunt-group command and:1.Assign a group numbe

System 75 and DEFINITY G1 Initial ImplementationPage 2 of 5HUNT GROUPGroup Number: 1Group Extension: 30000Group Type: ucdGROUP MEMBER ASSIGNMENTSExtNa

System 75 and DEFINITY G1 Initial ImplementationChanging Coverage PathsUse the change coverage path command to make the appropriate changes.COVERAGE P

System 75 and DEFINITY G1 Initial Implementation4. Enter LWC Reception? according to the following table:Release SettingR1V1yR1V2 yesR1V3ap-speG1msa-s

System 75 and DEFINITY G1 Initial ImplementationAdministering Trunk Names(Integrated Only)The purpose of trunk name administration is to enter the nam

System 75 and DEFINITY G1 Initial Implementation3.Move the Cursor to Application Package Administration andpress (Enter).— The Application Package A

System 75 and DEFINITY G1 Initial Implementation5. Administer the trunks.Add a trunk name by using the following steps:a.Press [F3] (ADD).— The Add a

About This GuidePurpose and ScopeThe information in this guide is intended to help the AUDIX ‘M Voice PowerSystem Manager, the AT&T Account Team p

System 75 and DEFINlTY G1 Initial ImplementationRemove a trunk name by using the following steps:a.b.—Move the cursor to the trunk name to be removed.

IndexDocumentation conventions, iiiDocuments, related, vAEAccessing, Configuration Management menu, 1-5Adding trunk names, 3-19Administrationanalog ch

IndexKKeys, iiifunction, iiiTouch-Tone, iiiMMapping extensions to channels, 1-14Message Waiting Lamp, 2-3display phone, 3-20parameters, 2-11NNon-integ

About This ManualThis guide is divided into the following chapters:Chapter 1: Overview and Testing describes the AUDIX Voice Powerhardware and softwar

About This ManualHow to Use This GuideThe initial implementation of an AUDIX Voice Power system involves setting upboth AUDIX Voice Power and the tele

About This ManualA typical AUDIX Voice Power screen might be:Configuration ManagementReportsSwitch InterfacesSystem MonitorInformation ConventionsThe