AT&T Merlin Guia de Instalação Página 145

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 144
ADMINISTRATION
If your responsibilities do not include system administration, skip this
information.
The system is factory-set to have the Busy Buster feature assigned to voice
terminal jack 19 on the control unit.
However, you can use the following
procedure to assign the feature to any other voice terminal jack in the system,
except jack 10.
1
2
3
4
5
6
Enter administration mode by sliding the T/P switch to P and touching
Administer.
Dial *35.
Touch the Auto Intercom button or dial the intercom number of the jack to
which the Busy Buster feature will be assigned.
The green light goes on next to the Auto Intercom button to which the feature will be assigned.
Touch Administer.
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center position.
Make sure the BB jack is moved to the corresponding voice terminal jack
you’ve just assigned.
T P
Auto
Administer
Intercom
35
T P
Administer
PROGRAMMING
This feature requires a button with lights.
To program a button on your voice terminal for the Busy Buster feature:
1 Label the button Busy Buster.
2 Slide the T/P switch to P.
The voice terminal rings every 5 seconds to remind you that you are programming and that
you cannot place or receive calls.
3
Touch the button you want to program.
4 Dial *31 (you do not need to dial an outside number).
5 Slide the T/P switch to the center position.
T P
Busy
Buster
T P
31
5-26 MERLIN Plus System Features
Vista de página 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 336 337

Comentários a estes Manuais

Sem comentários