AT&T Merlin Guia de Instalação Página 327

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 326
Possible Cause 2:
Control unit or voice terminal may be defective.
Do This
If
Then
Step 1.
The feature works correctly
The trouble is either the
Program the feature on a
voice terminal on which the
second voice terminal and try
feature did not work or the
to use the feature.
control unit. To determine
which, go to Step 2.
The feature still doesn't work
The problem is in the control
unit. Contact your
equipment supplier for
assistance.
Step 2.
The trouble remains
The problem is in the control
Replace the first voice
unit. Contact your
terminal with a voice
equipment supplier for
terminal known to be
assistance.
working correct] y.
The trouble no longer occurs
The first voice terminal is
defective. Replace it.
SYMPTOM: VOICE
Possible Cause 1:
No lines are assigned to the ASA incoming or
TERMINAL LIGHTS FLASH
outgoing line group.
WHEN AN AUTOMATIC
SYSTEM ACCESS
Do This
If
Then
FEATURE IS ACTIVATED.
Refer to Section 5,
The feature works
“Reference” for instructions
for administering incoming
or outgoing lines for the
ASA feature you want.
Press the feature button twice
to stop the flashing light.
The feature still doesn't work
Go to Possible Cause 2.
Possible Cause 2:
Only one line is assigned to the incoming and outgoing group
and it’s the same line for both.
Do This
If
Then
Incoming and outgoing lines
cannot be the same line. See
Section 5 “Reference’ for
instructions for
administering two
separate lines.
The feature works
The feature still doesn’t work
Press the feature button twice
to stop the flashing light.
Go to Possible Cause 3.
(continued)
Troubleshooting Procedures
7-11
Vista de página 326
1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 336 337

Comentários a estes Manuais

Sem comentários